PVC water supply pipe cap

Purpose: Permanently or temporarily plug the end of the pipe.

Installation precautions:

Cleaning: Make sure the pipe end to be plugged is clean, dry, undamaged, and the cut is flat, vertical, and burr-free.

Apply glue: Apply glue evenly on the outer wall of the pipe end and the inner wall of the pipe cap.

Tighten: Push the pipe cap to the bottom with force and rotate it 1/4 turn.

Temporary plugging: If it is only temporary plugging (such as waiting for subsequent connection after pressure test), you can consider using a threaded pipe cap or a mechanical plug (such as a pipe plug) for easy disassembly. However, permanent plugging must be glued.

Pressure considerations: Make sure the pressure level of the selected pipe cap matches the pipeline system.