Its use, installation method and precautions have been included in the "eccentric reducer" section of the above UPVC reducer, so I will not repeat them. Once again, the importance of installation direction is emphasized.
Structure:
Eccentric reducer: One side of the diameter reduction part is kept straight and the other side is tilted. The purpose is to keep the bottom or top of the pipe flush.
Installation (socket bonding):
Follow the general method of socket bonding.

Precautions:
Eccentric direction! This is the most critical point for installing eccentric reducers. Installing it upside down will cause functional problems (gas or liquid accumulation).
The pipe diameters at both ends of the reducer must match the connected pipes exactly.
The diameter reduction is a stress concentration point, and the pipes on both sides must be reliably supported and fixed with pipe clamps.