PE female thread extension interface
PE water pipe joint, internal thread internal thread repair joint, tee internal thread water pipe saddle, half repair joint
Product features
*Acid and alkali resistant, wear resistant, low temperature resistant, aging resistant, UV resistant, impact resistant, good flexibility, long service life
Describe
|
model |
Φ25mm |
Product Usage |
Water supply pipes, municipal engineering pipes, agricultural irrigation |
|
Product Material |
Polyethylene |
Product color |
black |
Uses: Mainly used for connection at the increased diameter of PE pipes, and converted to metal internal thread interfaces.
Usage:
The large diameter end is hot-melted to the large diameter PE pipe.
The small diameter end is hot-melted to the small diameter PE pipe.
Or, if the small diameter end is an internal thread, after cooling, wrap the raw tape/glue on the metal external threaded part to be connected, screw it into the internal thread of the increased interface and tighten it appropriately.
Installation precautions:
Clarify the direction of the reducer and reducer.
When hot-melting, pay attention to the different heating time and insertion depth corresponding to different pipe diameters.
If the small end is a hot-melt small tube, ensure that the small tube is adequately supported. If the small end is a metal part with internal thread connection, fix the increased interface body when tightening.
Usage:
The large diameter end is hot-melted to the large diameter PE pipe.
The small diameter end is hot-melted to the small diameter PE pipe.
Or, if the small diameter end is an internal thread, after cooling, wrap the raw tape/glue on the metal external threaded part to be connected, screw it into the internal thread of the increased interface and tighten it appropriately.
Installation precautions:
Clarify the direction of the reducer and reducer.
When hot-melting, pay attention to the different heating time and insertion depth corresponding to different pipe diameters.
If the small end is a hot-melt small tube, ensure that the small tube is adequately supported. If the small end is a metal part with internal thread connection, fix the increased interface body when tightening.
